Here are the setup files for DVR 4000. The software supports up to 16 cameras. MP4/H.264 recording.
Download the DVR4000 and client player manuals drivers from the links below-
New Version 4.01 - DVR4000-DVRS-FlashBlack-ENG-v4.01.rar
I recommend upgrading to a newer and cheaper card like 16CH D1 Record H.264 DVR Card if you are having problems with the dvr4000 pci card.
-->
Here are some setup instruction files that I found with the dvr package.
User manual download links -
Download the DVR4000 and client player manuals drivers from the links below-
New Version 4.01 - DVR4000-DVRS-FlashBlack-ENG-v4.01.rar
DVR 4000 old Version - http://www.mediafire.com/?mynmztwazwd
 |
| DVR4000 |
 |
| DVR4000 server settings |
 |
| DVR4000 Server |
User manual download links -
dvr 4000 PCI CCTV card Digital Hard Disk Video System - User's Manual for Client Side.doc
dvr 4000 PCI CCTV card Digital Hard Disk Video System - User's Manual for Player.doc
dvr 4000 PCI CCTV card Digital Hard Disk Video System - User's Manual for Server (server)
DVR4000 dvr cctv Server installation setup instructions
dvr 4000 PCI CCTV card Digital Hard Disk Video System - User's Manual for Player.doc
dvr 4000 PCI CCTV card Digital Hard Disk Video System - User's Manual for Server (server)
DVR4000 dvr cctv Server installation setup instructions
8 comments:
I am having issues with this software. I've installed it on 3 computers and the server asks me to choose a drive when i run it. but no drives show up. the client however shows my hard drive and will open fine.
any help is appreciated!!!!
thanks,
Damien
If you have not resolved this problem yet, I suggest that you check your drive types and also make sure there is enough space etc.
I am having trouble regarding the installation of the driver for the card. It says card not found while my card is already inserted.
try the old version aswell to see if it works!
i installed server setup in a pc and all is working fine.
Now im trying to configure for remote control. i have static ips
i configured the server also forwarded the ports in a router. But when i go to prowser and i write my ip it doesnt work...
For making it work do i need also to install client setup or what are you sugessting...
Its an old post i know, but if anyonw can help know ill be greatfull.
THNX
I have installed Server setup in a pc and all works well..
Now i want to make cameras work in remote connection (i have static IPs)
i configured everything in Server side(i also forwarded ports in a router) but when i go and enter the ip in address bar, it doesnt work..
Do i have to install also the cleint side to make it work, or what r u sugesstiong?
i know its an old post, but if there is someone who can help in this manner ill be very greatfull.
THNX
it does not work with my card i switched back top the old version although the new server soft looks a lot better and works faster ... and probably with out the bugs ..
Also was rebooting my pc from time to time
hi
Post a Comment